Aisin AS69RC Deep Transmission Pan

时间：2025-09-23 17:49:58

This new PML pan features heavy duty construction, extra capacity, drain, and cooling fins.
PML design this pan to provide as much clearance as possible to the bolts at the rear of the pan.
There is a cross member below these bolts and to access them on the stock pan or the PML pan, you will probably need to jack up the transfer case.
PML designed this pan to work with the stock gasket and filter.

Cooling - extra fluid capacity, fins, and aluminum construction for cooler fluid temperatures

Drain plug - on the side for safety

Secure seal - machined flat gasket flange for a leak free seal

Strength - high quality, thick walls

PML located the drain plug on the driver's side of the pan.
On the side of the pan, the drain plug is less likely to get damaged.
The other three bosses can be drilled and tapped for a temperature sending unit if needed.

Increased oil capacity for cooler temperatures

Sand-cast aluminum with raised fins

3/16-inch thick wall construction to add strength to the transmission case

3/8-inch thick gasket flange will not bend when bolts are tightened

Machined gasket surface for a secure seal

Boss cast into pan can be machined for a temperature sensor

Magnetic drain plug for easier, less messy maintenance

Mounting hardware provided

Volume : 3 to 4 quarts over stock, approximately

Dimensions: this pan is about 6 inches deep, Click here for dimensions. A separate window or tab will open.

Number of Bolts: 20

Gasket and filter not included (use stock parts).

Aisin AS69RC Deep Transmission Pan

电话：